人才队伍

专家详情页

所在位置: 首页 > 人才队伍 > 专家详情页

字体: 【大】 【中】 【小】

陈晓华

电话:010-82375388 办公室:主楼292 传真:010-62333447 职称:副研究员 Email:chenxh@skl.ustb.edu.cn

研究方向

非晶合金、高熵合金的研究

纳米结构金属材料的研究

焊接材料及焊接接头强韧化研究


教育经历

2004/09-2009/07  北京科技大学  材料学    博士

2001/09-2004/07  哈尔滨工业大学  材料加工工程    硕士

1988/09-1992/07  哈尔滨工业大学  焊接    学士


工作经历

2015/07-至今         北京科技大学  新金属材料国家重点实验室    副研究员

2009/07-2015/06  北京科技大学  新金属材料国家重点实验室    讲师

2013/09-2014/10  美国佐治亚理工学院  材料科学与工程学院    访问学者


奖    励

2019年中国机械工业科学技术发明一等奖,原位纳米增强增韧金属材料的理论及关键技术

2018年中国产学研合作创新成果奖二等奖,原位纳米增强增韧金属材料的研究及应用

2011年教育部自然科学二等奖,块体非晶合金的结构与强韧化研究


论文著作

1、K.X. Chen, XH Chen, Z.D. Wang. Morphological instability of iron-rich precipitates in Cu-Fe-Co alloys, Acta Materialia 163 (2019) 55-67.

2、Tao Wang, Xiaohua Chen, Xiang Luo, Han Jiang, Mingwen Chen, ZidongWang, Formation of Si nanoparticle in Al matrix for Al-7wt.%Si alloy during complex shear flow casting, Journal of Alloys and Compounds 739 (2018) 30-34.

3、Luo X, Chen XH, Pan SW, Tang H, Wang ZD, Effect of morphologies of martensite–austenite constituents on impact toughness in intercritically reheated coarse-grained heat-affected zone of HSLA steel. Materials Science & Engineering A 710 (2018) 192–199.

4、Kaixuan Chen, Xiaohua Chen, Zidong Wang, Huahai Mao, Rolf Sandstrom. Optimization of deformation properties in as-cast copper by microstructural engineering. Part I. microstructure, Journal of Alloys and Compounds 763 (2018) 592-605.

5、Tao Wang, Xiaohua Chen, Guodong Shi, Changrong Li, Zidong Wang. Formation and capturing of nanoparticles in Cu-1wt.%Fe alloy melt during directional solidification process. Journal of iron and steel research, international 24(2017)411-415.

6、Tao Wang, Xiaohua Chen, Zidong Wang. Anisotropy of Crystal-Melt Interfacial Energy for Al-Si and Al-Si-Sc Alloys. RARE METAL MATERIALS AND ENGINEERING 46(2017)1566-1571.

7、Luo, X, Chen, XH, Wang, ZD. High Toughness Independent of Low-Medium Heat Inputs in Coarse-Grain Heat-Affected Zone of a Designed HSLA Steel. Steel research international 87 (2017) No. 9999.

8、Luo X, Niu, YW, Chen, XH, Tang, H, Wang, ZD. High performance in base metal and CGHAZ for ferrite-pearlite steels. Journal of Materials Processing Technology 242 (2017) 101–109.

9、Y. Yu, Y.H. Cai, X.H. Chen, T. Wang, Y.D. Wu, J.J. SI, X.D. Hui. High Toughness Independent of Low-Medium Heat Inputs in Coarse-Grain Heat-Affected Zone of a Designed HSLA Steel. Materials Science & Engineering 651 (2016) 961–967.

10、Kaixuan Chen , Shiwei Pan , Yuzhi Zhu , Yongjian Cheng , Xiaohua Chen, Zidong Wang. In situ observations of crack propagation in as-cast Cu-1.5Fe-0.5Co (wt%) alloy. MATERIALS Science and engineering A. 706(2017)211-216.

11、Hao Tang, Xiaohua Chen, YaWei Niu, XiangLuo, Zidong Wang, Mingwen Chen,Guodong Shi. Thermal stability characteristics of in situ nano-particles formed in metal melt. Materials Letters. 162(2016)261–264.

12、Y. Yu, Y.H. Cai, X.H. Chen, T. Wang, Y.D. Wu, J.J. SI, X.D. Hui. A high strength and elastic carbon containing near- α Ti alloy prepared by hot isostatic pressing process. Materials Science & Engineering A. 651 (2016) 961–967.

13、Kaixuan Chen, Xiaohua Chen, Zidong Wang. Effect of in-situ nanoparticle wall on inhibiting segregation of tin bronze alloy. MATERIALS LETTERS. 175(2016) 148-151.

14、Kaixuan Chen, Xiaohua Chen, Zidong Wang. Morphological instability of spherical nano iron-rich crystal in copper melt. MATERIALS LETTERS. 2016.

15、Kaixuan Chen, Xiaohua Chen, Zidong Wang. Formation mechanism of in-situ nanostructured grain in cast Cu-10Sn-2Zn-1.5Fe-0.5Co (wt.%) alloy. MATERIALS & DESIGN, 94 (2016) 338–344.

16、Kaixuan Chen, Xiaohua Chen, Zidong Wang. Crystallographic features of iron-rich nanoparticles in cast Cu-10Sn-2Zn-1.5Fe-0.5Co alloy. MATERIALS CHARACTERIZATION. 113(2016)34-42.

17、Kaixuan Chen, Xiaohua Chen, Ding ding, Guodong shi, Zidong Wang. Heterogeneous nucleation effect of in situ iron-rich nanoparticles on grain refinement of copper alloy. Materials letter. 168(2016)188-191.

18、A high strength and elastic carbon containing near- α Ti alloy prepared by hot isostatic pressing process. Y. Yu, Y.H. Cai, X.H. Chen, T. Wang, Y.D. Wu, J.J. SI, X.D. Hui. Materials Science & Engineering A A 651 (2016) 961–967.

19、Xiaohua Chen, Zidong Wang, Ding Ding, Hao Tang, Lili Qiu, Xiang Luo, Guodong, Shi. Effects of in-situ nanoparticles on microstructure of welding thermal cycle for Ni-Cr-Mo steels, Transactions of Materials and Heat Treatment, 2015, 66: 60-66.

20、Xiaohua Chen, Zidong Wang, Ding Ding, Hao Tang, Lili Qiu, Xiang Luo, Guodong, Shi. Strengthening and toughening strategies for tin bronze alloy through fabricating in-situ nanostructured grains, Materials and Design, 2015, 66: 60-66.

21、陈晓华,王自东,左龙飞,汤浩,罗翔,刘雄军. Ni-Cr-Mo 钢原位纳米相对焊接热循环组织的影响. 2015 36(3):130-134.

22、陈晓华,张保玉,惠希东. 钨丝直径对连续锆基非晶复合材料组织和力学性能的影响. 稀有金属材料与工程. 2015, 44(2):469-474.

23、Xiaohua Chen, Xin Tang, Zidong Wang, Xidong Hui, Mo Li, Yongwei Wang. Manufacturing Process and microstructure of copper-coated aluminum wires. International Journal of Minerals Metallurgy and Materials. 2015, 22(2):190-196.

24、Xiaohua Chen, Lili Qiu, Hao Tang, Xiang Luo, Longfei Zuo, Zidong Wang. Effect of nanoparticles formed in liquid melt on microstructure and mechanical property of high strength naval steel. Jorunal of Materials Processing Technology. 2015, 222: 224-233.

25、Guodong Shi, Xiaohua Chen, Han Jiang, Zidong Wang, Hao Tang, Yongquan Fan. Strengthening mechanisms of Fe nanoparticles for single crystal Cu-Fe alloy. 2015, 636:43-47.

26、X. H. Chen, B. Hou, Z. D. Wang, Formation of an abnormal lamellar precipitate in Cu-Cr-Zr-Mg-Ce nanocomposite during solution treatments. 2015,19(s5)1333-1336.

27、Hao Tang, Xiaohua Chen, YaWei Niu, XiangLuo, Zidong Wang, Mingwen Chen,Guodong Shi. Thermal stability characteristics of in situ nano-particles formed in metal melt. Materials Letters. 162(2016)261–264.

28、Phase composition and solid solution strengthening effect in TiZrNbMoV high-entropy alloys.    Y.D. Wu, Y.H. Cai, X.H. Chen, T. Wang, J.J. Si, L. Wang, Y.D. Wang, X.D. Hui. Materials & Design    83 (2015) 651–66.

29、T. Wang, Y.D. Wu, J.J. Si, Y.H. Cai, X.H. Chen, X.D. Hui.Novel Ti-based bulk metallic glasses with superior plastic yielding strength and corrosion resistance Materials Science & Engineering A. 642 (2015) 297–303.

30、J. J. Si, T. Wang, Y. D. Wu, Y. H. Cai,  X. H. Chen, W. Y. Wang, Z. K. Liu, and X. D. Hu Cr-based bulk metallic glasses with ultrahigh hardness. APPLIED PHYSICS LETTERS 106, 251905 (2015).

31、Kun Qiao, Yudong Zheng, Xiaohua Chen. Hydrophilic Nanofiber of Bacterial Cellulose Guided the Changes in the Micro-structure and Mechanical Properties of nf-BC/PVA Composites Hydrogels. COMPOSITES SCIENCE AND TECHNOLOGY 118 • AUGUST 2015 with Impact Factor: 3.57. 2015.

32、Hao Tang, Xiaohua Chen, Xiang Luo, Mingwen Chen, Zidong Wang, Longfei Zuo. Heterogeneous nucleation effect of in sity nanoparticles on the metal-matrix microstructure. Materials Letter. 2014, 137: 455-459.

33、Hao Tang, Xiaohua Chen, Mingwen Chen, Longfei Zuo, Bin Hou, Zidong Wang. Microstructure and mechanical property of in-situ nano-particle strengthened ferric steel by novel internal oxidation. Materials Science & Engineering A, 2014, 609: 293-299.

34、Wu J, Zheng Y, Song W, Luan J, Wen X, Wu Z, Chen X, Wang Q, Guo S. In situ synthesis of silver-nanoparticles/bacterial cellulose composites for slow-released antimicrobial wound dressing. Carbohydr Polym; 2014 Feb 15;102:762-71.

35、Wu J, Zheng Y, Wen X, Lin Q, Chen X, Wu Z. Silver nanoparticle/bacterial cellulose gel membranes for antibacterial wound dressing: investigation in vitro and in vivo. Biomed Mater; 2014 Jun;9(3):035005.

36、Y.F. Zhao, D.Y. Lin, X.H. Chen, Z.K. Liu, X.D. Hui. Sluggish mobility and strong icosahedral ordering in Mg-Zn-Ca liquid and glassy alloys. Acta Materialia 2014, 67: 266-277.

37、Y. Wu, X.J. Liu, X.H. Chen, X.D. Hui, Z.P. Lu. Designing bulk metallic glass composites with enhanced formability and plasticity. J Mater Sci Technol, 2014, 30(6): 566-575.

38、Chen, Xiao-hua; Zhang, Bao-yu; Hui, Xi-dong. Effect of Nb on the corrosion behavior of continuous bulk metallic glass-coated steel wire composites International  Journal of  Minerals Metallurgy and Materials, 20(6),2013: 589-592.

39、Wang, Yinfeng; Ma, Shengguo; Chen, Xiaohua; Shi, Juyan; Zhang, Yong; Qiao, Junwei. Optimizing Mechanical Properties of AlCoCrFeNiTix High-Entropy Alloys by Tailoring Microstructures. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 26(3), 2013:277-284.

40、Zhang, Bao-yu; Chen, Xiao-hua; Lu, Zhao-ping; Hui, Xi-dong. Coating thickness control in continuously fabricating metallic glass-coated composite wires. Journal of Minerals Metallurgy and Materials, 20(5), 2013:456-461.

41、Zhang, Baoyu; Chen, Xiaohua; Hui, Xidong. Confined fracture behavior of bulk metallic glass-coated tungsten composite wires produced by continuously coating process. JOURNAL OF ALLOYS AND COMPOUNDS, 553, 390(2013):14-18.

42、Wu Jian; Zheng Yu-Dong; Gao Shuang; Guo Jia; Cui Qiu-Yan; Ding Xun; Chen Xiao-Hua. Synthesis, Structural Characteristics and Properties of Silver Nanoparticles in situ Bacterial Cellulose Gelatinous Membrane. CHEMICAL JOURNAL OF CHINESE UNIVERSITIES-CHINESE, 34(1), 856,2013: 210-217.

43、Hui, X.; Lin, D. Y.; Chen, X. H.; Wang, W. Y.; Wang, Y.; Shang, S. L.; Liu, Z. K.. Structural mechanism for ultrahigh-strength Co-based metallic glasses. SCRIPTA MATERIALIA, 68(5), 2013: 257-260.

44、Zhang, B. Y.; *Chen, X. H.; Wang, S. S.; Lin, D. Y.; Hui, X. D.. High-strength tungsten wire reinforced Zr-based bulk metallic glass matrix composites prepared by continuous infiltration process. MATERIALS LETTERS, 93, 2013: 210-214.

45、Bin Hou, Longfei Zuo1, Fuyong Tao, Dong Fang, *Xiaohua Chen, Hong,Zhang, Zidong Wang. Effect of aging process on organization and performance of Cu-Cr-Zr-Mg alloys. Applied Mechanics and Materials 327 2013: 117-122.

46、Ding Ding, Kang Wu, Lili Wang, *Xiaohua Chen, ZidongWang. The influence of Fe on the strength and ductility of Cu–10Sn–2Zn based alloys. Applied Mechanics and Materials 327 (2013): 151-155.

47、左龙飞,倪睿,王自东,陈晓华.  低碳高强钢中纳米相回火过程中的透射生分析。钢铁研究学报, 25(3), 2013: 39-45.

48、左龙飞,魏战雷,倪睿,王自东,陈晓华. 热处理工艺对800MPa低碳贝氏体钢组织性能的影响. 钢铁研究学报, 2012, 24(12): 37-41.

49、Hui XiDong, Xu ZhiYi, Wu Yuan, Chen XiaoHua, Liu XiongJun, Lu ZhaoPing. Magnetocaloric effect in Er-Al-Co bulk metallic glasses. CHINESE SCIENCE BULLETIN, 56(36), pp 3978-3983, 2011.

50、Chen, Xiaohua, Zhang, Baoyu, Chen, Guoliang, Hui, Xidong, Xing, Xianran. Study on corrosion behavior of continuous bulk metallic glass-coated steel wire composite. INTERMETALLICS, 19(12), pp 1913-1918, 2011.

51、于春燕,惠希东,陈晓华,林德烨,刘梓葵,陈国良. Al-Ni非晶合金的原子堆垛结构及密度的第一性原理分子动力学模拟. 中国科学:技术科学, 06期, pp 745-753,2011.

52、惠希东,许志一,吴渊,陈晓华,刘雄军,吕昭平. Er-Al-Co块体非晶合金的磁热效应. Chinese Science Bulletin,33期,pp 2812-2818, 2011.

53、Yu ChunYan, *Hui XiDong, Chen XiaoHua, Liu XingJun, Lin DeYe, Liu ZiKui, Chen GuoLiang. Ab initio molecular dynamics simulation of the atom packing and density of Al-Ni amorphous alloys. Science China-Technological Sciences, 53(12), pp 3175-3182, 2010.  

54、Chen, Xiaohua, Zhang, Baoyu, *Chen, Guoliang, Zhang, Yong, Hui, Xidong, Lu, Zhaoping, Liu, Xiongjun, Xu, Yong, Xing, Xianran. Continuously manufacturing of bulk metallic glass-coated wire composite. Intermetallics, 18(11), pp 2034-2038, 2010.

55、惠希东,方华志,王恩睿,刘雄军,陈晓华,陈国良. 铝、锆液固态转变和动力学性质的第一性原理分子动力学研究. 中国科学:物理学 力学 天文学, 10 (10): (2010)1208-1220.

56、Zhang, Xing-chao, Zhang, Yong, Chen, Xiao-hua, Chen, Guo-liang. Bulk metallic glass rings prepared by a modified water quenching method. INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 16(1), pp 108-111, 2009.

57、Chen, Xiaohua, Zhang, Yong, Chen, Guoliang, Zhang, Xingchao, Liu, Lei. Calculations of potential functions and thermophysical behaviors for La62Al14Ni12Cu12 and Cu46Zr44Al7Y3 bulk metallic glasses.Journal of Applied Physics, 103(11), 2008.

58、陈晓华,张兴超,张勇,陈国良. 定向开孔多孔块体非晶合金的制备和组织. 稀有金属材料与工程,S4期,2008.

59、张兴超,陈晓华,张勇,陈国良. 超高强度及塑性的钨丝增强ZrTiCuNiBeNb金属玻璃复合材料稀有金属材料与工程,S4期,2008.

60、Chen, X. H., Zhang, X. C., Zhang, Y., Chen, G. L.. Fabrication and characterization of metallic glasses with a specific microstructure for micro-electro-mechanical system applications. Journal of Non-Crystalline Solids, 354(28), pp 3308-3316, 2008.

61、Zhang, Xingchao, Yong, Zhang, Hao, Tong, Yong, Li, Chen, Xiaohua, Chen, Guoliang. Micro-electro-discharge machining of bulk metallic glasses. International Symposium on High Density Packaging and Microsystems Integration, pp 213-216, 2007.

62、Chen, X. H., Zhang, Y., Zhang, X. C., Hui, X. D., Wei, B. C., Chen, G. L. A porous bulk metallic glass with unidirectional opening pores. Electrochemical and Solid State Letters, 10(12), pp E21-E23, 2007.


专    利

1、袁紫樱, 关舒月, 冯荣, 程永建, 陈晓华; 一种制备FIB三维重构用“鼻尖”试样的方法, 、201811568193.5, 2018.12.21.

2、王自东, 王涛, 陈晓华, 一种铸造具有纳米和微米混合晶粒结构材料的装置,201610696626.X,2016.08.19.

3、王自东, 侯彬, 陈晓华, 刘松, 康乐, 戴斯海, 一种Cr纳米结构晶粒铜的制备方法, 201310477158.3, 2013. 10.14.

4、陈晓华, 张宝玉, 惠希东, 一种纤维增强金属玻璃复合材料丝的连续制备设备与工艺, 201210168417.x, 2012. 05. 28.

5、惠希东, 周夏凉,陈晓华, 戚玉凤, 王树申, 赵岩峰, 吕昭平, 一种含高钯低铜的钛基块体非晶合金及制备方法, 201110227481.6, 2011. 08. 09.

6、刘雄军, 陈国良, 惠希东, 吕昭平, 陈晓华 一种Zr-Cu-Al-Be系大块非晶合金及其制备方法, 201010231050.2, 2010. 07. 14.

7、陈晓华, 陈国良, 张勇, 张宝玉, 惠希东, 吕昭平, 刘雄军, 一种制备大尺寸快递非晶复合材料的方法及装置, 200910236801.7, 2009.11.06.

8、张勇,陈晓华,陈国良, 张兴超, 王自东,一种金属玻璃包覆金属丝复合材料的连续制备设备与工艺, CN101139689, 2007. 08. 16.

9、陈晓华, 张勇, 陈国良, 张兴超, 王美玲, 惠希东, 王自东, 一种电化学腐蚀金属丝制备多孔块体金属玻璃的方法, 200710064498.8, 2007. 03. 16.


科研项目

1、xxx“十三五”预研项目:xxxx合金精密铸造技术, 主持, 2016.1-2020.12

2、新型xxx合金焊接接头强韧化技术, xxx预研项目,主持, 2017.1-2018.12

3、xxxxx钢及xxx的重大基础研究, xxx重点基础研究发展计划项目, 专题负责人, 2015.1-2019.12


学术兼职

中国材料研究学会金属间化合物与非晶分会 科普委员