人才队伍

专家详情页

所在位置: 首页 > 人才队伍 > 专家详情页

字体: 【大】 【中】 【小】

张   迪

电话:010-62332508 办公室:主楼287 传真:010-6233344 职称:研究员 Email:zhangdi@skl.ustb.edu.cn

研究方向

(1)交通用先进系列铝合金开发及应用研究

(2)铝合金先进制备成形工艺全程工艺优化研究


教育经历

2005/04-2008/04 日本广岛大学 机械工程系 博士

2002/09-2005/03 北京科技大学 新金属材料国家重点实验室 硕士

1998/09-2002/07 河北工业大学 材料科学与工程学院 学士


工作经历

2021/07-至今 北京科技大学 新金属材料国家重点实验室 研究员

2012/09-2021/06 北京科技大学 新金属材料国家重点实验室 副研究员

2008/05-2012/03 日本大阪大学 焊接科学研究所 博士后研究员


论文著作

近五年代表性论文(*为通讯作者)

(1)Haoran Liu, Zeyu Zhao, Di Zhang*, Jishan Zhang*, Mechanical property and microstructure evolution of novel Al-Mg-Zn(-Cu) alloys under dynamic impact, Materials Science and Technology, Vol. 37, 2021, 852-862.

(2)Di Zhang*, Xin Zhao, Yanlin Pan, Hongxiang Li, Li Zhou, Jishan Zhang, Linzhong Zhuang, The suppression of solidification cracking of Al welds by regulating Zn/Mg ratio, Welding in the World, Vol. 65, 2021, 691-698.

(3)Xuebing Liu, Di Zhang*, Hui Wang, Yu Yan, Xinfang Zhang*, Regulating solute partitioning utilized to decorate grain boundary for improving corrosion resistance in a model Al-Cu-Mg alloy, Corrosion Science, Vol. 181, 2021, 109219.

(4)Di Zhang*, Xu Wang, Yanlin Pan, Shengli Hou, Jishan Zhang, Linzhong Zhuang, Li Zhou, Friction stir welding of novel T-phase strengthened Zn modified Al-Mg alloy, Journal of Materials Science, Vol. 56, 2021, 5283-5295.

(5)Yanlin Pan, Di Zhang*, Haoran Liu, Linzhong Zhuang, Jishan Zhang*, Precipitation hardening and intergranular corrosion behavior of Al-Mg-Zn-Cu alloys, Journal of Alloys and Compounds, Vol. 853, 2021, 157199.

(6)Shengli Hou, Di Zhang*, Yanlin Pan, Qingwei Ding, Weimin Long, Jishan Zhang, Linzhong Zhuang*, Dependence of microstructure, mechanical properties, and inter-granular corrosion behavior of Al-5.1Mg-3.0Zn-0.15Cu alloys with high temperature pre-treatment, Materials Characterization, Vol. 168, 2020, 110512

(7)Yingxin Geng, Di Zhang*, Jishan Zhang, Linzhong Zhuang, Zn/Cu regulated critical strain and serrated flow behavior in Al–Mg alloys, Materials Science & Engineering A, Vol. 795, 2020, 139991.

(8)Yanlin Pan, Di Zhang*, Haoran Liu, Zhaorui Zhang, Hongxiang Li, Linzhong Zhuang, Jishan Zhang*, Reducing welding hot cracking of high-strength novel Al–Mg–Zn–Cu alloys based on the prediction of the T-shaped device, Science and Technology of Welding and Joining, Vol. 25, 2020, 483-489.

(9)Di Zhang*, Zhen Zhang, Yanlin Pan, Yanbin Jiang, Linzhong Zhuang, Jishan Zhang, Xinfang Zhang* Current-driving intergranular corrosion performance regeneration below the precipitates solvus temperature in Al-Mg alloy, Journal of Materials Science and Technology, Vol. 53, 2020, 132-139.

(10)Yingxin Geng, Di Zhang*, Jishan Zhang, Linzhong Zhuang, On the suppression of Luders elongation in high-strength Cu/Zn modified 5××× series aluminum alloy, Journal of Alloys and Compounds, Vol. 834, 2020, 155138.

(11)Qingwei Ding, Di Zhang*, Yu Yan, Linzhong Zhuang, Jishan Zhang*, Role of subgrain stripe on the exfoliation corrosion of Al-4.6Mg-3.1Zn(wt%) alloy, Corrosion Science, Vol. 169, 2020, 108622.

(12)Di Zhang*, Xin Zhao, Yanlin Pan, Hongxiang Li, Li Zhou, Jishan Zhang, Linzhong Zhuang, Liquation cracking tendency of novel Al-Mg-Zn alloys with a Zn/Mg ratio below 1.0 during fusion welding, Metals, Vol. 10, 2020, 222.

(13)Shengli Hou, Di Zhang*, Qingwei Ding, Jishan Zhang, Linzhong Zhuang*, Solute clustering and precipitation of Al-5.1Mg-0.15Cu-xZn alloy, Materials Science & Engineering A, Vol. 759, 2019, 465-478.

(14)Qingwei Ding, Di Zhang*, Yanlin Pan, Shengli Hou, Linzhong Zhuang, Jishan Zhang*, Strengthening mechanism of age-hardenable Al-xMg-3Zn alloys, Materials Science and Technology, Vol. 35, 2019, 1071-1080.

(15)Qingwei Ding, Di Zhang*, Jinrong Zuo, Shengli Hou, Linzhong Zhuang, Jishan Zhang*, The effect of grain boundary character evolution on the intergranular corrosion behavior of advanced Al-Mg-3wt%Zn alloy with Mg variation, Materials Characterization , Vol. 146, 2018, 47-54.

(16)Qibiao Ma, Di Zhang*, Linzhong Zhuang, Jishan Zhang, Intergranular corrosion resistance of Zn modified 5××× series Al alloy during retrogression and re-aging treatment, Materials Characterization, Vol. 144, 2018, 264-273.

(17)Chunyan Meng, Di Zhang*, Pingping Liu, Linzhong Zhuang, Jishan Zhang, Microstructure characterization in a sensitized Al–Mg–Mn–Zn alloy, Rare Metals, Vol. 37, 2018, 129-135.

(18)Shengli Hou, Di Zhang*, Jishan Zhang, Linzhong Zhuang*, Precipitation hardening behavior and microstructure evolution of Al–5.1 Mg–0.15Cu alloy with 3.0Zn (wt%) addition, Journal of Materials Science, Vol. 53, 2018, 3846-3861.

(19)Yulong Cai, Suli Yang, Shihua Fu*, Di Zhang*, Qingchuan Zhang*, Investigation of Portevin–Le Chatelier band strain and Elastic shrinkage in Al-based alloys associated with Mg contents, Journal of Materials Science & Technology, Vol. 33, 2017, 580-586.

(20)Cheng Cao, Di Zhang*, Linzhong Zhuang, Jishan Zhang, Improved age-hardening response and altered precipitation hardening behavior of Al-5.2Mg-0.45Cu-2.0Zn (wt%) with pre-aging treatment, Journal of Alloys and Compounds, Vol. 691, 2017, 40-43.

(21)Cheng Cao, Di Zhang*, Xu Wang, Qibiao Ma, Linzhong Zhuang, Jishan Zhang, Effects of Cu addition on the precipitation hardening response and intergranular corrosion of Al-5.2Mg-2.0Zn (wt.%) alloy, Materials Characterization, Vol. 122, 2016, 177-182.

(22)Cheng Cao, Di Zhang*, Zhanbing He, Linzhong Zhuang, Jishan Zhang, Enhanced and accelerated age hardening response of Al-5.2Mg-0.45Cu (wt%) alloy with Zn addition, Materials Science & Engineering A, Vol. 666, 2016, 34-42.

(23)Chunyan Meng, Di Zhang*, Linzhong Zhuang, Jishan Zhang, Correlations between stress corrosion cracking, grain boundary precipitates and Zn content of Al-Mg-Zn alloys, Journal of Alloys and Compounds, Vol. 655, 2016, 178-187.


专利

(1)张迪、张少丹、潘艳林、张济山、庄林忠,一种Al-Mg-Zn合金板材的形变热处理方法,201910256350.7,2020.12.29

(2)张迪、丁清伟、侯陇刚、庄林忠、张济山,一种短流程制备高强高耐蚀Al-Mg-Zn铝合金的的形变热处理方法,201810073537.9,2019.09.10

(3)张迪、侯胜利、张济山、庄林忠,一种提高时效强化型Al-Mg-Zn合金晶间腐蚀性能的热处理工艺,201710262367.4, 2019.03.29

(4)张迪、赵鑫、侯胜利、庄林忠、张济山,一种提高铝合金焊缝强度和抗裂能力的方法,201710467055.7,2019.01.11

(5)张迪、马启彪、侯胜利、庄林忠、张济山,一种Al-Mg-Zn合金的时效热处理方法,201610603065.4,2018.05.01

(6)张迪、曹城、张济山、庄林忠,Al-Mg-Cu-Zn系铝合金及铝合金板材制备方法,201510263049.0,2017.09.29

(7)张迪、张济山、孟春艳、王正安、庄林忠,一种铝合金板材的制备方法,201410117124.8,2017.01.25

(8)张迪、张济山、南文争、王正安、庄林忠、李僜谚、罗海云,一种高强度抗腐蚀Al-Mg合金及其制备工艺,201410381094.1,2017.01.04

(9)张迪、侯胜利、张济山、庄林忠、刘君城,一种Al-Mg-Zn系合金及其合金板材的制备方法,201410577461.5,2016.08.24


科研项目

(1)国家自然科学基金,51971019,新型Al-Mg-Zn合金T-Mg32(AlX)49相的析出行为及强化机制研究,2020-2023,主持

(2)国家自然科学基金,51571013,5×××系铝合金的快速时效析出强化及锯齿变形行为研究,2016-2019,主持

(3)国家自然科学基金,51301017,新型抗晶间腐蚀5×××系铝合金的析出强化机理研究,2014-2016,主持

(4)高性能铝合金大规格板带材微结构设计与组织性能调控机理研究,国家重点研发计划重点专项, 2016-2020,骨干成员

(5) XXXX铝合金技术, XXXX项目,2018-2021,骨干成员

(6)新型耐蚀船舶用铝合金的应用基础研究,中央高校基本科研业务费,2017-2018,主持

(7)现代交通金属材料与加工技术北京实验室项目,北京市教委项目,2013-2019,参与


学术兼职

(1)10多种国际学术期刊审稿人

(2)国家自然科学基金、教育部学位论文函评专家