新金属材料国家重点实验室 首页|English 首页 English
 
 
 
李宏祥
发布日期:2014-10-10 15:04:54 阅读次数:10642

 

李宏祥

副研究员,硕士生导师
电话:(01062332350

传真:(01062333447
E-mail
hxli@skl.ustb.edu.cn
办公室:主楼293房间
地址:北京市海淀区学院路30                
邮编:100083

 

教育简历

1998     南昌航空大学           材料科学与工程系            学士

2002     中国机械科学研究总院   材料科学与工程系            硕士

2008     韩国国立庆北大学校     材料科学及冶金系            博士

                                        

工作简历:

1998.7-1999.9     沈阳铸造研究所         新技术研究开发中心          助理工程师        

2002.9-2004.3     沈阳铸造研究所         新技术研究开发中心          助理工程师         

2008.3-2010.11    北京科技大学           新金属材料国家重点实验室    博士后      

2011.4-2011.10    荷兰代尔夫特理工大学   机械航海材料学院            访问学者            

2011.6            挪威能源技术研究所     流体流动成型系              访问学者

2012.7-现在       北京科技大学           新金属材料国家重点实验室    副研究员

 

研究兴趣:

1)双金属层状复合材料的制备、热处理及轧制工艺研究

2)大规格高强度铝合金铸锭热裂、冷裂、偏析等铸造缺陷研究

3)铁基非晶合金的非晶形成能力与软磁性能研究

4)多场耦合下钢的连铸全过程的模拟仿真研究

 

在研主要项目:

1863项目:新型轻质高强铝合金(2013-2016

2)教育部博士学科点专项科研基金:大规格高强度铝合金熔铸过程中裂纹缺陷预测的数值模拟研究(2013-2015

3)北京市优秀人才项目:新型高软磁性能Fe-(C,Si,B,P)-Cu块体非晶钢的室温脆化机制研究(2014-2015

4北京市自然科学基金:工业制备高非晶形成能力高塑韧性块体非晶钢的关键影响因素研究(2014-2016)

5)中铝合作项目:大规格铝合金铸造过程数值模拟技术研究(2012-2014

6)中国-荷兰-挪威合作项目:钢的连铸全过程数值模拟模型Steelsim的开发(2014-2015 

 

主要获奖和荣誉

12/2013   入选北京市优秀人才

11/2008   入选在韩高级留学人才资源库

5/2008   “2007年度中国国家优秀自费留学生奖学金

 

主要社会兼职:

美国矿物、金属、材料学会(TMS)会员

北京科技大学新金属材料国家重点实验室                 保密干事

中国金属学会连续铸钢分会第6届连铸控制技术委员会     委员

Intermetallics》审稿人

Journal of Alloys and Compounds》审稿人

Materials Science and Technology》审稿人

Rare Metal Materials and Engineering》审稿人

China Foundry》审稿人

《铸造》海外信息英文翻译兼审稿人

 

组织国内外学术会议:

作为先进高强钢(E1)分会主席之一,组织了第2届世界青年科学家先进材料大会(IUMRS- ICYRAM2014)并作特邀报告

 

指导过的学生:   

毕业的硕士:

胡江(北京现代),唐娜娜(清华大学下属公司),丁秀萍(出国深造)

在读硕士

聂新宇,李跃,祝文臻,李长秋

协助指导的在读博士:

白清领,赵康宁

 

授权专利

(1) 一种钛/铝固液复合铸造成型方法,公开号: CN103769561A

(2) 一种铝/镁固液复合铸造成型方法,公开号: CN103691909A

(3) 一种铝包镁复合板材制备方法,公开号:  CN103691910A

(4) 一种改善钛/铝固液复合界面塑韧性的铸造方法,申请号:201410464865.3

(5) 一种镁/镁固液复合铸造成型方法,提交专利局

(6) 高饱和磁化强度和高玻璃形成能力的铁基软磁材料,授权号:CN 101604567B

(7) 含有超过5种元素的铁类块状非晶态合金组合物以及含有非晶相的复合物,授权号:CN 100478483C

 

5年部分代表性论文

2014

[1] X.Y.Nie, J.C.Liu, H.X.Li*, Q.Du, J.S.Zhang, L.Z. Zhuang,An investigation on bonding   mechanism and mechanical properties of Al/Ti compound materials prepared by insert moulding[J]Materials& Design63,pp142-150,2014.(IF=3.171)

[2] Q. L. Bai, H.X.Li*, Q. Du, J. S. Zhang, L. Z. Zhuang, Mechanical properties and constitutive behavior of as-cast high strength AA7xxx alloys below solidus temperature[J], Materials Science Forum,794-796,pp467-472,2014.

[3] X.P. Ding, H. Cui, J.X. Zhang, H.X.Li*, M.X. Guo, Z. Lin, L.Z. Zhuang, J.S.Zhang, The effect of Zn on the age hardening response in an Al-Mg-Si alloy[J]Materials& Design2014,accepted. (IF=3.171)

[4] Q.L.Bai,J.C.Liu, Y.Li, H.X.Li*, J.S.Zhang, L.Z.Zhuang, Hot tearing evaluation and contraction behaviors of four AA7xxx alloys[J], Materials Science Forum, 2014,accepted.

[5]H.B.Ling, Q.Li, H.X.Li,J.J.Zhang,Y.Q.Dong,C.T.Chang, S.Yi, Preparation and characterization of quaternary magnetic Fe80-xCoxP14B6 bulk metallic glasses[J], Journal of applied physics, 115, pp204901, 2014.(IF=2.185)

2013

[6] H. X. Li, J. E. Gao, Y. Wu, Z. B. Jiao, D. Ma, A. D. Stoica, X. L. Wang, Y. Ren, M. K. Miller, and Z. P. Lu*, Enhancing glass-forming ability via frustration of nano-clustering in alloys with a high solvent content[J],Scientific Reports,3, 1983, DOI: 10.1038/srep01983, 2013.(IF=5.078)

[7] J. E. Gao, Z. P. Chen, Q. Du, H. X. Li, Y. Wu, H. Wang, X. J. Liu, Z. P. Lu*, Fe-based bulk metallic glass composites without any metalloid elements[J], Acta Materialia, 61, pp3214-3223, 2013.(IF=3.94)

[8] J.E. Gao, H. X. Li, F. Jiang, B.Winiarski, P. J. Withers, P. K. Liaw, Z.P. Lu*, Effects of cooling rates on glass formation and magnetic behavior for the Fe73.0C7.0Si3.3B5.0P8.7 Mo3.0 bulk metallic glass[J],Metallurgical And Materials Transactions A, 44(5),pp2004-2009,2013.(IF=1.73)

2012

[9] H.X.Li, J.E. Gao, S.L.Wang, S. Yi, Z.P.Lu*, Formation, Crystallization Behavior, and Soft Magnetic Properties of FeCSiBP Bulk Metallic Glass Fabricated Using Industrial Raw Materials[J], Metallurgical And Materials Transactions A, 43A, pp2615-2619, 2012.(IF=1.73)

[10] H.X.Li, S. L.Wang, Y. Jeong, S. Yi*, Corrosion behaviors of thermally grown oxide films on Fe-based bulk metallic glasses[J], International Journal of Minerals, Metallurgy and Materials, 19, pp726-732, 2012.(IF=0.573)

[11] S.L.Wang, H.X.Li, Y. Jeong, S. Yi*, Effects of electrolyte ph on the electrochemical behavior of Fe-based bulk metallic glass[J], Metals and Materials International, 18, pp791-797, 2012.(IF=1.223)

[12] S.L.Wang, H.X.Li, S. Y. Hwang, S. D. Choi, S. Yi*, Corrosion behaviors of coatings fabricated using bulk metallic glass powders with the composition of Fe68.5C7.1Si3.3 B5.5P8.7Cr2.3Mo2.5Al2.0[J], Metals and Materials International, 18, pp607-612, 2012. (IF=1.223)

[13] Z.P.Chen, J.E.Gao, Y.Wu, H.X.Li, H.Wang, Z.P.Lu*, Role of rare-earth elements in glass formation of Al–Ca–Ni amorphous alloys[J], Journal of Alloys and compounds, 513, pp387-392, 2012.(IF=2.726)

2011

[14] H.X. Li, S.L. Wang, S. Yi*, A new type Fe-based bulk metallic glass with high Cr contents and high corrosion resistance fabricated using industrial raw material[J], The proceedings of the China association for science and technology, 7, pp166-169, 2011.

[15] J.E.Gao, H.X.Li, Z.B.Jiao,Y.Wu,Y.H.Chen,T.Yu, Z.P.Lu*, Effects of nanocrystal formation on the soft magnetic properties of Fe-based bulk metallic glasses[J], Applied Physics Letters, 99, pp052504, 2011.(IF=3.515)

[16] Z.B. Jiao, H.X.Li, J.E. Gao, Y. Wu, Z.P. Lu*, Effects of alloying elements on glass formation, mechanical and soft-magnetic properties of Fe-based metallic glasses[J], Intermetallics,19, pp1502-1508, 2011.(IF=2.119)

[17] X.F.Zhang*, H.X.Li, Z.Q .Jiang, S.Yi,  Effect of minor Si and Ag additions on glass-forming ability of Ti-Cu-Co-Zr-Sn-Be bulk metallic glass[J], Materials Science Forum, 688, pp400-406, 2011.

[18] X.F.Zhang*, H.X.Li, Z.Q.Jiang, S.Yi, Bulk metallic glass Ti42Cu37.1Co4Zr8Sn2 Ag2 Be4.9 with high glass forming ability and ductility[J], Advanced Materials Research, 217-218, pp636-641, 2011.

2010

[19] H.X. Li, Z.B. Jiao, J.E. Gao, Z.P. Lu*, Synthesis of bulk glassy Fe–C–Si–B–P–Ga alloys  with high glass-forming ability and good soft-magnetic properties[J], Intermetallics, 18, pp1821-1825, 2010.(IF=2.119)

[20] Y. Wu, H. X. Li, Z. Y. Liu, G. L. Chen, Z. P. Lu*, Interpreting size effects of bulk metallic glasses based on a size-independent critical energy density[J], Intermetallics, 18, pp157-160, 2010.(IF=2.119)

[21]Y. Wu, H. X. Li, Z. B. Jiao, J.E.Gao, Z.P.Lu*, Size effects on compressive deformation behavior of a brittle Fe-based bulk metallic glass[J], Philosophical Magazine Letters,90, pp403-412, 2010.(IF=1.268)

[22] Z. B. Jiao, H. X. Li, Y. Wu, J. E. Gao, S. L. Wang, S. Yi, Z. P. Lu*, Effects of Mo additions on the glass-forming ability and magnetic properties of bulk amorphous Fe-C-Si-B-P-Mo Alloys[J], Science in China: Physics, Mechanics & Astronomy, 53, pp430-434, 2010.(IF=0.864)

友情链接
  北京科技大学新金属材料国家重点实验室